Cart Total Items (0)

Cart

  • Lun - Ven 8:00 - 18:00 / Samedi 8:00 - 14:00
  • Visitez-nous :
Facebook-f Linkedin-in Instagram
Demander un devis
Boutique

Shop Details

-30%

UPS EVO DSP PLUS 6.0 – PF 1

UPS EVO DSP PLUS 6.0 PF 1 – Power 6KVA. On Line Technology (VFI) DSP, 94% Efficiency, Input / output 230 / 230Vac 50 / 60Hz, dimensions 19×68.8×36.9 cm, weight 18 Kg,ready to install 16 12V 7-9-11Ah batteries.

UPS EVO DSP PLUS 6.0 – Power 6 KVA PF 1. On Line Technology (VFI) DSP, 94% Efficiency, Input / output 230 / 230Vac 50 / 60Hz, dimensions 19×68.8×36.9 cm, weight 18 Kg,ready to install 16 batteries from 7.2-9-11ah, extension bacup time through additional battery boxes (optional). Multifunction graphic LCD display, static and manual bypass, EPO contact for emergency shutdown, USB and RS232 communication ports for UPS control and on / off programming via the free TecnoManager software. SNMP, Dry Contact or MODBUS card (optional).

Reviews

There are no reviews yet.

Be the first to review “UPS EVO DSP PLUS 6.0 – PF 1”

Votre adresse e-mail ne sera pas publiée. Les champs obligatoires sont indiqués avec *

Fiche technique
CodeFGCEDP6MM/00
Nominal Power6 KVA
Active Power6 KW
Power Factor1
TechnologyOn-Line Double Conversion transformerless (VFI-SS-111)
CoolingFan cooling
Audible Noise< 55 dBA to 1 m
Dimension (UPS) WxHxD19x68,8x36,9 cm
Dimension (with packing) WxHxD32x92,2x51,4 cm
Weight18 Kg
Input
Nominal Voltage208Vac/220Vac/230Vac/240Vac
Input Voltage Range176Vac-300Vac from 50% to the 100% of loading, 110Vac-300Vac up to 50% load
Nominal Frequency50/60 Hz (selectable)
Number of phases1Ph+N
Input power factor0,99
Output
Transfer time0 ms (On-Line)
Number of phases1Ph+N
Nominal voltage208Vac/220Vac/230Vac/240Vac
Static voltage Regulation at %100 linear load (On-Line and battery mode)±2%
Voltage THD at rated linear load<3% (linear load), <5% (non-linear load)
Crest factor3:1
Frequency50/60 Hz (selectable)
Inverter waveformSinewave
Efficiency94%, calculated in double conversion mode at 100% load to 100% load according to standard 62040-3
Frequency stability±0,1 Hz
Overload capability (Battery mode)110% for 3 minutes, 130% for 30 seconds, >130% for 10 seconds
Overload capability (On-line mode)110% for 30 minutes, 130% for 5 minutes, >130% for 10 seconds
Battery
TypeLead acid, sealed, maintenance free
Extended autonomyExternal Battery Box (optional)
Installed inside-
Environmental specification
Working TemperatureFrom 0 to 55 °C (recommended from 20 to 25 °C)
Humidity< 95% without condensation
Maximum Altitude3000 m
IP ProtectionIP20
CertificationsCE (Standards: Low Voltage Directive IEC EN 62040-1; EMC Directive IEC EN 62040-2; classification IEC EN 62040-3)

Produits similaires

  • UPS EVO DSP PLUS RACK MOUNT 10.0 – PF 0.9

  • BATTERY BOX FOR EVO DSP PLUS RACK MOUNT 6-10 KVA

  • UPS ERA PLUS 1,200 RACK MOUNT

×